Miami Roofing Services
Roof repairs, full replacements, storm damage, gutters, metal roofing, flat roofs. Best Roofers Near Me | Miami covers it all in Miami. Licensed, insured, manufacturer-certified.
Roof Replacement
Your roof replacement includes a full-system install: ice and water shield at eaves, valleys, and penetrations; synthetic underlayment across the entire deck; aluminum drip edge at rake and eave; starter strip with sealant; architectural shingles with 130+ mph wind rating; and continuous ridge vent for proper attic ventilation. We also install new pipe boots and vent flashing on every penetration.
Get a Free Quote →
Roof Repair
Our roof repair process: inspect the issue, identify the root cause, quote the fix, do the work, warranty the repair. Simple. If the root cause is widespread (poor ventilation causes ice dams, for example), we'll recommend addressing that too. But the choice is always yours.
Get a Free Quote →
Storm Damage Repair
After every major storm in Miami, out-of-town companies flood the area offering free inspections. They're not all bad, but many are. We're local, we're licensed, and we'll be here to honor the warranty. Storm chasers won't be.
Get a Free Quote →
New Roof Installation
We handle new construction from permits through final inspection. Our Miami office coordinates with your builder on scheduling, material delivery, and inspection timing. Typical install time is 1-3 days depending on size and complexity.
Get a Free Quote →
Metal Roofing
Metal roofing reflects solar heat instead of absorbing it. In Florida, that means 15-25% lower cooling costs compared to dark asphalt shingles. The higher upfront cost pays for itself over the life of the roof. And the life of a metal roof is twice or three times longer than shingles.
Get a Free Quote →
Shingle Roofing
Asphalt shingles cover more homes in America than every other roofing material combined. There's a reason. They're affordable, they look good, they last 25-50 years depending on the grade, and they come in dozens of colors and profiles. Our Miami crews have installed thousands of shingle roofs and we know the product better than most roofers in the state.
Get a Free Quote →
Flat Roofing
TPO single-ply membrane is our most-installed flat roof system in Miami. White reflective surface reduces cooling costs, hot-air welded seams are watertight, and 15-20 year manufacturer warranties are standard. Available in 45-mil, 60-mil, and 80-mil thickness.
Get a Free Quote →
Commercial Roofing
Need a commercial roof coating? Silicone coatings over existing TPO, EPDM, or metal extend life 10-15 years for a third of replacement cost. Not every roof qualifies. The existing membrane needs to be in decent shape. We core sample and moisture scan to verify before we recommend it.
Get a Free Quote →
Gutter Installation
We hang gutters with hidden hangers screwed into the rafter tails or fascia board every 24 inches max. No spike-and-ferrule, no exposed hardware. Proper pitch is 1/4" per 10 feet toward each downspout. Too flat and water sits. Too steep and it looks wrong.
Get a Free Quote →
Roof Inspection
Roof inspections are free for Miami homeowners. No strings, no obligation to hire us for repairs. If your roof is fine, we say so. If it needs attention, you get an honest assessment of what's going on and what it'll cost to fix.
Get a Free Quote →
Emergency Roof Repair
Emergency protocol for active water intrusion: (1) interior containment. Buckets, plastic sheeting, water extraction if accessible, (2) exterior tarping with 20x30 heavy-duty poly sheeting over damaged area extending minimum 4 feet past damage on all sides, (3) secure with 2x4 nailer boards lag-screwed to the roof deck (not through shingles), (4) secondary tarp overlap for multi-section damage, (5) document with timestamped photos for insurance. Permanent repair scheduled within 48-72 hours once materials are sourced.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →